IS200TTRUH1C - Terminal Board

IS200TTRUH1C - Terminal Board IS200TTRUH1C - Terminal Board

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

IS200TTRUH1C - Terminal Board is available in stock which ships the same day.

IS200TTRUH1C - Terminal Board comes in UNUSED as well as REBUILT condition.

To avail our best deals for IS200TTRUH1C - Terminal Board, contact us and we will get back to you within 24 hours.

SPECIFICATIONS

Part No.: IS200TTRUH1C
Manufacturer: General Electric
Country of Manufacture: United States of America (USA)
Number of channels: 24
Temperature: 0 to 60°C
Size: 26.04 cm high x 1.99 cm wide x 18.73 cm deep
Product Type: Terminal Board
Availability: In Stock
Series: Mark VI

Functional Description

IS200TTRUH1C is a Terminal Board developed by GE. It is a part of Mark VI control system. The terminal board serves as the primary wiring connection point within the system, facilitating the distribution of signals to I/O board. Speed control systems for small turbines necessitate a streamlined system architecture. To achieve cost-efficiency and space savings, simplex control is implemented. Instead of the larger T-type terminal boards employed in TMR systems, compact DIN-rail-mounted terminal boards are utilized. Additionally, IONet is omitted as D-type terminal boards directly cable into the control chassis to interface with the I/O boards.

Role in Speed Control Systems

Small turbine speed control systems require a streamlined architecture to enhance cost-effectiveness and space efficiency. Instead of employing triple modular redundant (TMR) systems, which use larger T-type terminal boards, these setups incorporate simplex control for reduced complexity and improved affordability.

To further optimize space and simplify installation, the terminal board is DIN-rail mounted, allowing for compact and organized configurations. Unlike TMR-based systems that rely on IONet for data transmission, the D-type terminal boards are designed to connect directly to the control chassis via cabling, thereby eliminating the need for an additional communication network.

Signal Distribution and Connectivity

  • Efficiently distributes signals to three separate DC-37 pin connectors, each corresponding to the R, S, and T I/O boards.
  • These connectors serve as interfaces for cables linking the terminal board with the control system, ensuring reliable signal transmission.
  • Different versions of this terminal board may include varied connector configurations to accommodate different I/O board types.

Variations in Terminal Board Design

Depending on the specific application and I/O board compatibility, variations of the terminal board exist with different layouts and functionalities:

  • Basic Thermocouple Boards: Some thermocouple board versions do not include signal fan-out functionality and may feature only two connectors, enabling direct cabling to a single I/O board.
  • Advanced Versions with Signal Fan-Out: Other versions are equipped with signal fan-out capabilities, featuring up to six connectors for connecting redundant R, S, and T I/O channels, enhancing system redundancy and signal integrity.

Circuitry and Components

  • It primarily includes filters and protective components to prevent electrical noise interference and safeguard against voltage surges.
  • This minimalistic approach reduces the risk of single-point failures, enhancing system reliability.
  • Power for the output signals is generally supplied by the connected I/O boards.

However, in applications involving relay or solenoid outputs, the terminal board may include dedicated power plugs to provide a direct power source for these components.

Enhancing System Reliability and Performance

  • Efficient signal distribution, reducing transmission errors.
  • Compact DIN-rail mounting, optimizing space utilization.
  • Protective circuitry, minimizing system failures due to electrical disturbances.
  • Direct cabling to control chassis, eliminating the need for an additional communication network.

Other Features

  • Constructed from polyester resin material rated for temperatures up to 130°C (266 °F).
  • Terminal rating: 300 V, 10 A, UL Class C for general industry, with 0.375 inches of creepage and 0.250 inches of strike.
  • Approved by UL and CSA codes.
  • Screws feature a zinc clear chromate finish, while contacts are tin-plated.
  • Each block screw is labeled with numbers 1 through 24 or 25 through 48 in white for easy identification.
  • Recommended screw tightening torque: 8 in-lbs.

The WOC team is always available to help you with your Mark VI requirements. For more information, please contact WOC.

Frequently Asked Questions

What is IS200TTRUH1C?
It is a Terminal Board developed by GE under the Mark VI series.

What material is used for construction?
The terminal block is constructed from polyester resin material, ensuring durability and reliability even at temperatures up to 130oC.

What are the terminal ratings?
The terminal block is rated for 300 volts and 10 amps, meeting UL Class C standards for general industry. It features 0.375 inches of creepage and 0.250 inches of strike, ensuring safe and efficient electrical connections.

Are there any certifications?
Yes, the terminal block is approved by both UL and CSA codes, assuring compliance with industry standards and regulations.

What finishes do the screws and contacts have?
The screws are finished with zinc clear chromate, providing corrosion resistance and longevity. Meanwhile, the contacts are tin-plated, ensuring excellent conductivity and reliability.