World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.
IS200CABPG1B - Control Assembly Backplane Board is available in stock which ships the same day.
IS200CABPG1B - Control Assembly Backplane Board comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS200CABPG1B - Control Assembly Backplane Board, contact us and we will get back to you within 24 hours.
SPECIFICATIONS
Part Number: IS200CABPG1B
Manufacturer: General Electric
Series: Mark VI
Product Type: Multi-Layer Printed Wiring Board
Availability: In Stock
IS200CABPG1B is a Control Assembly Backplane Board manufactured by General Electric as a part of the Mark VI series used in the gas turbine control systems. The IS200CABP Control Assembly Backplane(CABP) board is a multilayer printed wiring board that enables connectivity for printed wiring boards inserted into it as well as external signal interfaces. The number of boards installed depends on the power level and application of the Innovation Series drive to which the CABP board belongs. These boards are
External interfaces such as user control inputs/outputs (I/O), four front panel meters, diagnostic/configuration tools, a front panel keyboard, four ISBus ports, and power supply inputs are also accessible via connectors. The CABP board is mounted to the Innovation Series board rack, which has mounting points for each board. A single IS200HFPA High-Frequency Ac/Fan Power SupplyBoard powers the CABP board (HFPA). For the 48 V ac power, a twisted/shielded pair cable is used, and a separate isolated twisted pair cable is used for the 17 V ac power. These cables have a 1000 V dc isolation.
The CABP board connects the isolated power returns to the control cabinet common (CCOM) either indirectly or directly via an impedance (resistor/capacitor). It also links DCOM and CCOM. Provisions are made for all cable shields (where appropriate) to be connected directly to the chassis. Each for CCOM and Chassis Ground, there are two application-specific stab-on connectors (GND). The mounting screws connect GND to the board rack chassis. A capacitor is used to connect CCOM and GND. The stab-on connections link the CABP board CCOM to the control cabinet CCOM.
HARDWARE FEATURES
Near the application cable entry into the cabinet are the terminal boards associated with the CABP board for user I/O. Two multi-conductor cables connect to these terminal boards, one for low voltage (less than 50 volts) and the other for high voltage (more than 50 volts).
Board connectors are either individually keyed, utilize different connectors (96 pins versus 128 pins) for identical modules, or keep the same pin assignments so that modules can be swapped out without causing damage. The following are the normal board locations:
WOC has the largest stock of Speedtronic Mark VI replacement control spare parts and we can repair your faulty parts with a warranty of 12 months. WORLD OF CONTROLS can also supply UNUSED and REBUILT IS200CABPG1B backed up with a warranty of up to 24 months. Our team of experts is available round the clock to support your needs. Our sales team at WOC is happy to assist you with any of your automation requirements. Please contact our staff by phone or email for pricing and availability on any parts and repairs.
FREQUENTLY ASKED QUESTIONS
What is GE Mark VI IS200CABPG1B?
The Control Assembly Backplane board is a multilayer printed wiring board that allows for communication between inserted printed wiring boards and external signal ports.
How to Check Price and Availability For IS200CABPG1B?
Please Contact World of Controls FZE for sales at +1 609 385 1231 or Request a Quote.
