DS200TCQAF1BBK - Software PROM Set

SPECIFICATIONS

Part No.: DS200TCQAF1BBK
Manufacturer: General Electric
Country of Manufacture: United States of America (USA)
Storage temperature: -40 to 85oC
Relative humidity: 5 to 95 percent, no-condensing
Product Type: Software PROM Set
Availability: In Stock
Series: Mark V

Functional Description

DS200TCQAF1BBK is a Software PROM Set developed by GE. It is a part of Mark V control system. The software EPROM set is utilized within the TCQA analog IO Board, which plays a crucial role in scaling and conditioning various analog signals sourced from terminal boards connected to the I/O cores R1, R2, and R3 in the system.

TCQA hardware jumpers

• J1 and J2 (mA Output Circuits Selection): These jumpers are used to select the mA output circuits on the board. Typically, there are multiple output circuits available, and J1 and J2 help in choosing which specific circuit or circuits are active or configured in a certain way. This selection is crucial for routing and managing the output signals effectively.
• J5 and J6 (mA Outputs Current Range): These jumpers determine the maximum current range for the mA outputs. Depending on the jumper configuration, the board can be set to support either a 20 mA maximum current range or a 200 mA maximum current range. This flexibility allows adapting to different operational requirements and ensures compatibility with various types of equipment and systems.
• J7 (RS232 Port for Card Tests): J7 is dedicated to configuring the RS232 port specifically for conducting tests on the card. This port is essential for diagnostic purposes, allowing technicians and engineers to perform detailed tests and troubleshooting procedures to ensure the board functions correctly and meets performance specifications.
• J8 (Oscillator Enable): J8 enables an oscillator on the board. Oscillators generate precise timing signals or clock pulses, which are essential for synchronizing operations within the board or with external devices. Enabling J8 ensures that the oscillator is active and operational, thereby maintaining accurate timing and synchronization as required by the board’s functions.

The WOC team is always available to help you with your Mark V requirements. For more information, please contact WOC.

Frequently Asked Questions

What is DS200TCQAF1BBK?
It is a Software PROM Set developed by GE under the Mark V series.

What are hardware jumpers J1 and J2 used for?
J1 and J2 are used to select the mA output circuits on the board. They determine which specific circuits are active or configured in a certain way to route and manage the output signals effectively.

What is the purpose of jumpers J5 and J6?
J5 and J6 configure the mA output current range. Depending on the jumper configuration, the board can support either a 20 mA maximum current range or a 200 mA maximum current range, adapting to different operational requirements.

What does jumper J7 do?
J7 is used to configure the RS232 port specifically for card tests. It allows technicians and engineers to perform diagnostic tests on the board, ensuring proper functionality and troubleshooting as needed.