DS200SIOBH1ABA - VME STAND I/O CARD/C

SPECIFICATIONS

Part Number: DS200SIOBH1ABA
Manufacturer: General Electric
Series: Mark V
Product Type: VME Stand I/O Card

Twenty jumpers and three switch blocks with six switches each make up the GE I/O Control Board DS200SIOBH1ABA, which has a total of 18 switches. One LED and one 40-pin connector are also included. The factory settings are established on the jumpers on the GE I/O Control Board DS200SIOBH1ABA on the original board. Some jumpers are only supported in one position and cannot be changed.

• When the board needs to be replaced, the best practice is to match the jumper positions on the old board with the jumpers on the new board. As a result, the board will behave consistently and support the drive's performance.
• Remove the old board from the drive by removing the screws that hold it in the board rack and removing the board with two hands. Make sure the board doesn't collide with any of the drive's other components. Flatten out a static protection bag on a clean, dry surface nearby. Place the old board on the bag. Slid out the replacement board from the sealed protective bag it was kept in. Place it next to the old board while carrying it with two hands. Set the switches to match the old board's switch placements.
• WOC stocks the largest Speedtronic Mark V control spares, and we can repair your faulty DS200SIOBH1ABA with a warranty. WORLD OF CONTROLS can also provide unused and rebuilt DS200SIOBH1ABA with a guarantee.

Our team of experts is available round the clock to support your DS200SIOBH1ABA needs. Our sales team at WOC is happy to assist you with any of your automation requirements. Please contact our staff by phone or email for pricing and availability on any parts and repairs.

FREQUENTLY ASKED QUESTIONS

What are the features of the GE DS200SIOBH1ABA I/O Control Board?

The GE I/O Control Board DS200SIOBH1ABA, which includes a total of 18 switches, is made up of twenty jumpers and three switch blocks with six switches each. A 40-pin connector and an LED are also included.

What is the most appropriate method for replacing the board?

When a board needs to be changed, the best practice is to match the old board's jumper positions with the new board's jumpers. As a result, the board will act in a consistent manner and will support the drive's success.

Where could I get a GE DS200SIOBH1ABA I/O Control Board?

World of Controls offers unused and rebuilt DS200SIOBH1ABA I/O Control Board. For price and availability on parts and repairs, please contact the WOC staff through phone or email.