IS200UCVEH1A - Standard Controller Module

SPECIFICATIONS

Part No.: IS200UCVEH1A
Manufacturer: General Electric
Series: Mark VI
Function: Standard Controller Module
Microprocessor Intel Celeron 300 MHz
Operating System: QNX
Availability: In Stock
Country of Manufacture: United States (USA)

Functional Description

IS200UCVEH1A is a Standard Controller Module developed by GE. It is a part of the Mark VI control system. UCVE boasts various forms, ranging from UCVEH2 to UCVEM01 through UCVMEM05. Each variant caters to distinct system demands and enhancements. UCVEH2 embodies the quintessential Mark VI controller. This single-slot board harnesses the prowess of a 300 MHz Intel Celeron processor, ensuring robust performance across control and monitoring operations. With options of 16 or 128 MB of flash memory and 32 MB of DRAM, UCVEH2 strikes a balance between storage capacity and processing efficiency.

Features

• Ethernet Connectivity: Equipped with a single 10BaseT/100BaseTX (RJ-45) Ethernet port, UCVEH2 seamlessly integrates into the Unit Data Highway (UDH), fostering streamlined communication within the system.
• This Ethernet port serves as the gateway for data exchange, configuration updates, and remote monitoring, enhancing system-wide connectivity.
• Flash Memory and DRAM: inclusion of flash memory and DRAM fortifies its capabilities in handling program execution and data storage.
• Flash memory ensures non-volatile storage for firmware and configuration data, while DRAM provides volatile memory for swift data processing and program execution.
• Ethernet Port Functionality: Supporting both 10BaseT and 100BaseTX Ethernet standards, the Ethernet port on UCVEH2 offers versatility in network connectivity.
• This port facilitates high-speed data transfer, enabling seamless communication with other networked devices and components within the Mark VI control system.
• Integration with Unit Data Highway (UDH): Seamlessly integrates with the Unit Data Highway (UDH), acting as a linchpin in the system's communication infrastructure.
• Through the UDH, UCVEH2 fosters data exchange with input/output modules, operator interfaces, and monitoring software, promoting system-wide interoperability.
• Scalability and Flexibility: The UCVE lineup's diverse variants, including UCVEH2 and others, offer scalability and flexibility to meet evolving system requirements and deployment scenarios.

Battery Connection for NVRAM and CMOS

• For seamless operation and data integrity within the Mark VI control system, it's imperative to correctly configure the battery connection. 
• Jumper Configuration: To establish connectivity for the batteries facilitating Non-Volatile Random Access Memory (NVRAM) and Complementary Metal-Oxide-Semiconductor
• (CMOS), adhere to the jumper configurations: Set jumper E8 to pins 7-8 (IN). Jumper E10 should also be set to (IN).

World of Controls has the most comprehensive collection of GE Mark VI components. Please contact WOC as soon as possible if you require any extra information.

Frequently Asked Questions

What is IS200UCVEH1A?
It is a Standard Controller Module designed and manufactured by GE.

What type of physical connection does the Primary Ethernet Interface (Ethernet 1) support?
The Primary Ethernet Interface (Ethernet 1) utilizes a twisted pair 10BaseT/100BaseTX connection with an RJ-45 connector, ensuring compatibility with standard Ethernet infrastructure.

Which communication protocols are used for data exchange over Ethernet 1?
TCP/IP protocol is employed for communication between the controller and toolbox, facilitating seamless data transfer and configuration management. Additionally, the EGD (Ethernet Global Data) protocol is utilized for communication with CIMPLICITY HMI (Human-Machine Interface) and Series 90-70 PLCs (Programmable Logic Controllers), enabling efficient data exchange for monitoring and control purposes.

Is Ethernet Modbus protocol supported on Ethernet 1?
Yes, Ethernet Modbus protocol is supported on Ethernet 1, enabling communication between the controller and third-party Distributed Control Systems (DCS). This facilitates interoperability and data exchange with external systems for enhanced system integration and control capabilities.