DS200UCIBG3AAA - UCIBG3/LBC586P INNOV.CONTRL

SPECIFICATIONS

Part No.: DS200UCIBG3AAA
Manufacturer: General Electric
Product Type: Motherboard
Series: Mark V

The GE UC2000 Motherboard DS200UCIBG3AAA has a single CPU and numerous programmable read only memory (PROM) modules, as well as a 10-LED block, a 50-pin connector, a connector for attaching additional boards, and two 3-pin connectors.

• This board also has a built-in solid-state drive (SSD) that allows mass storage. Solid-state drives provide a number of benefits over traditional storage systems, the first of which is their capacity. The SDD can hold up to 21.4 MB of data and has no moving parts, so it's less likely to break down or malfunction.
• They are smaller, require less voltage to power, and are simple to read and write new data to. The board must be changed if the SSD is defective. You must first download the information saved on the SSD drive on the damaged board before installing the replacement drive. Then, on the new board, copy the contents to the SSD.
• The programming instructions and other firmware that the microprocessor utilizes to process data are stored in the PROM modules. Because the PROM modules are erasable, the firmware can be upgraded if updates are available. When changing the board, however, the original PROM modules can simply be removed and inserted into the replacement board.

The most extensive assortment of GE Speedtronic Mark V control replacement components can be found at World of Controls. Our professionals are here to assist you with your Mark V requirements at any time. Please contact WOC if you require any additional information.

Frequently Asked Questions

Does DS200UCIBG3AAA support SSD?
Yes, the board supports a solid-state drive or SSD.

Which are the connectors on DS200UCIBG3AAA?
Two 3-pin connectors, one 50-pin connector and one connector to support the attachment of other boards.

How to Obtain DS200UCIBG3AAA?
WOC provides DS200UCIBG3AAA as well as other turbine control products. Contact World of Controls.