DS200TCTGG1AEC - Simplex Trip Board

SPECIFICATIONS

Part Number: DS200TCTGG1AEC
Manufacturer: General Electric
Series: Mark V
Product Type: Simplex Trip Board

DS200TCTGG1AEC is a Simplex Trip Board under the Mark V. series.

• There are 21 plug-in relays on the GE Simplex Trip Board DS200TCTGG1AEC. There are additionally three 50-pin connectors and two 12-pin connectors on the board. JLY, JLX, and JLZ are the IDs allocated to the 50-pin connectors. JN and JM are the IDs assigned to the 12-pin connectors.
• One bayonet-type connector is also included on the GE Simplex Trip Board DS200TCTGG1AEC. There are two independent wires with metal bayonets on the ends of the signal cable that connect to the bayonet-type connector. One wire is inserted into each connector and forcefully pressed into the connector by the installation. It clicks into the connector once it is secure. Pull it out of the connector to remove it.
• The 50-pin connectors are connected with ribbon cables. Because there are numerous 50-pin connectors on the board, there's a chance you'll connect them improperly when you replace them. Incorrect installation will increase the amount of time the drive is offline, as well as the amount of time other equipment around the drive is offline. Before removing the drive, turn off the power and inspect how the wires are attached to the board to minimize any delays.
• Make temporary labels out of masking tape or other materials, and write down the ID of the connector to which the cable is attached.
• Examine the new board to see if it has the same connector IDs as the original. The cables should be connected to the same connectors on the replacement board. Even if the connectors are in various places on the board, it will still function properly.

World of Controls has the most extensive range of Speedtronic Mark V control spare parts. World of Controls' experts are always available to help you with your GE Mark V requirements.  Please contact us if you require any other information.

FREQUENTLY ASKED QUESTIONS

What is DS200TCTGG1AEC?

DS200TCTGG1AEC is a Simplex Trip Board under Mark V.

What are the connectors included in DS200TCTGG1AEC?

There are three 50-pin connectors and two 12-pin connectors on DS200TCTGG1AEC. JLY, JLX, and JLZ are the IDs allocated to the 50-pin connectors. JN and JM are the IDs assigned to the 12-pin connectors.

How to obtain DS200TCTGG1AEC?

Call or mail the World of Controls team. WOC provides DS200TCTGG1AEC boards and other turbine control components.