DS200TCQEG2AED - LM 6000 IO Processor Board

SPECIFICATIONS:

Part Number: DS200TCQEG2AED
Manufacturer: General Electric
Series: Mark V LM
Product Type: LM 6000 IO Processor Board
Power Requirements: +5 V dc
Repair: 3-7 Day
Availability: In Stock
Country of Origin: United States
Manual: GEH-6153

FUNCTIONAL DESCRIPTION:

DS200TCQEG2AED is an LM 6000 IO Processor Board manufactured and designed by General Electric as part of the Mark V LM Series used in GE Speedtronic Control Systems. The LM 6000 IO Processor Board (TCQE) scales and conditions additional analog I/O signals and is located in the core. These signals include LVDT/LVDR inputs, 4-20 mA outputs, LM vibration inputs, proximitor vibration inputs, proximitor position inputs, RTD inputs, and magnetic pick up and TTL pulse rate inputs. The 3PL connector communicates the data from the TCQE board to the STCA board. This board is used for all LM applications.

TCQE CONNECTORS:

• 2PL - Distributes power from the TCPS board in the core.
• 3PL - The Data Bus between STCA, TCQA, and TCQE boards in core . Con-
  conditioned signals are carried on 3PL for transferring to the COREBUS.
• JJ - Connector for writing the high-pressure shaft speed signals to the TCQC board.
• JJQ - Connector that reads the high and low-pressure shaft speed signals from the PTBA terminal board in the core.
• JLL - Reads the LVDT/R inputs and the RTD inputs from the TBQE board. Writes the 4-20 mA outputs to the TBQE board.
• JO - Relay control signals used for the Load Coupling Shear and LP Shaft Shear protection are written to the TCRA board in location four of the core for solenoids connected to the DTBC board.
• JQQ - Reads the LM vibration inputs, proximitor vibration inputs, and pulse rate speed sensor inputs from the TBQE terminal board.

TCQE CONFIGURATION:

Hardware: Hardware jumpers JP1 and JP3 are the oscillator enabled for factory test. JP8 is for the stall timer. JP2 is the RS232 port enabled for factory tests. JP4 and JP6 configure the mA outputs. Hardware jumpers JP5 and JP7 are used to select the mA output current range, either 20 mA maximum or 200 mA maximum. Refer to Appendix A for information on the hardware jumper settings for this board.

Software: I/O Configuration constants for the RTDs, pulse rates, 4-20/200 mA outputs, proximity, vibration, accelerometer, and the LVDT/LVDR positions are entered in the I/O Configuration Editor located on the operator interface as described below.

WOC has the largest stock of GE Speedtronic Control System Replacement Parts. We can also repair your faulty boards. WORLD OF CONTROLS can also supply unused and rebuilt backed-up with a warranty. Our team of experts is available round the clock to support your OEM needs. Our team of experts at WOC is happy to assist you with any of your automation requirements. For pricing and availability on any parts and repairs, kindly get in touch with our team by phone or email.

FREQUENTLY ASKED QUESTIONS:

What is the LM 6000 IO Processor Board?

The LM 6000 IO Processor Board is a crucial component in the LM 6000 gas turbine control system. It manages input and output signals, facilitating communication between different parts of the turbine control system.

What functions does the IO Processor Board perform?

The IO Processor Board is responsible for processing and managing various input and output signals, such as temperature, pressure, and valve positions. It plays a vital role in controlling and monitoring the turbine's performance.

How does the IO Processor Board contribute to turbine control?

The board interfaces with sensors and actuators to collect data from the turbine and sends signals to control devices, ensuring optimal performance and safety of the LM 6000 gas turbine.