DS200TCPSG1ADB - DC INPUT POWER SUPPLY

SPECIFICATIONS

Part No.: DS200TCPSG1ADB
Manufacturer: General Electric
Product Type: DC Input Power Supply
Series: Mark V

DS200TCPSG1ADB is a DC Input Power Supply Board designed for the Mark V series. It has three fuses as well as numerous test points. One 9-pin connector and one 16-pin connector are also included on the board. When you suspect that the board is no longer performing as expected or has suddenly stopped working, the first step in troubleshooting is to check the three fuses. The fuses protect the board by shutting it down if there is too much current on the board or if there is an irregularity in the current.
Keep a supply of fuses with the same rating on hand in case the fuses blow.

• They must have the same rating because a different fuse could cause the board to overheat and cause damage. The three fuses on the board protect three different circuits on the board from damage caused by an excess of electric power.
• The power to the drive must be turned off before installing a replacement fuse. The qualified servicer performing the replacement must be familiar with the drive and how to safely disconnect it from power. Before working on the board, the drive must be tested to ensure that there is no power present.
• The fuses can be replaced without removing the board, depending on how the board is installed and how accessible the board is. If you must remove the board, use a screwdriver to unscrew the four screws that hold the board in the metal board rack.

The most comprehensive selection of GE Speedtronic Mark V control components is available at World of Controls. Our professionals are available to assist you with your Mark V requirements at any time. If you require any additional information, please contact WOC as soon as possible.

Frequently Asked Questions

What is DS200TCPSG1ADB?
DS200TCPSG1ADB is a DC Input Power Supply Board designed for the Mark V series.

How to Obtain DS200TCPSG1ADB?
World of Controls provides DS200TCPSG1ADB as well as other turbine control products. Contact WOC.

Whether signal conditioning is included on DS200TCPSG1ADB?
Yes, the board includes signal conditioning.