DS200SDCIG2ABA - CIRCUIT BOARD

SPECIFICATIONS

Part No.: DS200SDCIG2ABA
Manufacturer: General Electric
Product Type: SDCI DC Power Supply and Instrumentation Board
Series: Mark V

DS200SDCIG2ABA is a DC Power Supply and Instrumentation Board developed by General Electric under Mark V series. This component is used to connect DC2000 drives. When replacing the DS200SDCIG2ABA, you must unhook the cords from the damaged board with caution. Note where all the connections are linked on the damaged board to avoid confusion later while installing the new board.

• The various types of cables require different removal processes. When unplugging a ribbon cable, do not pull the ribbon cable. Instead, grab the board connector with one hand and the ribbon cable connector with the other, and pull the two connectors apart.
• Some cables have a tab that keeps the cable connector from moving around on the board. Pull the cable out from the connector by unlocking the tab with your finger.
• Remove any screws that hold the board's connectors in place. Keep the screws in a secure place until you're ready to install the new board. When you're ready to install the replacement board, hold it in one hand and rejoin the cables with the other.
• Refer to any diagrams you drew to show where the cables should be connected. Press the ribbon cable into the connector on the board while holding it by the connector. Ensure that it is fully inserted and snaps into place in the connector.
• When fully seated, tab-secured cables should snap into position as well. Insert the connection into the board if any cables are fastened with screws. Then, in the matching holes, put the screws and tighten them securely.

The most extensive collection of GE Speedtronic Mark V control components may be found at World of Controls. Our experts are here to assist you with your Mark V needs at any time. Please contact WOC right away if you require any additional information.

 

Frequently Asked Questions

 

What is DS200SDCIG2ABA?
DS200SDCIG2ABA is a DC Power Supply and Instrumentation Board developed by General Electric under Mark V series.

How to Obtain DS200SDCIG2ABA?
World of Controls provides DS200SDCIG2ABA as well as other turbine control products. Contact WOC.