DS200PANAH2ADD - ARCNET LAN Driver Card

SPECIFICATIONS

Part Number: DS200PANAH2ADD
Manufacturer: General Electric
Series: Mark V
Product type: ARCNET LAN Driver Card
Availability: In Stock
Country of Manufacture: United States (USA)

Functional Description

DS200PANAH2ADD is an ARCNET LAN Driver Card designed and developed by GE. It is a part of Mark V control system. It provides internal communications with I/O cores and ensuring smooth operation. The board serves as the ARCNET driver for internal communications with I/O cores, facilitating data exchange and coordination within the gas turbine control system. It operates as a daughterboard, mounted to the UCIA board, and utilizes P1 and P2 bus connectors to transfer data to the Control Engine on the UCPB board, ensuring seamless integration and communication between components.

Features

• Physical Configuration: The board is compact, measuring 3.75 inches square in size, designed to be seamlessly attached to the board rack inside the drive unit. It features one 40-pin connector, one 64-pin connector, and 10 jumpers, each serving specific functions in the board's operation and configuration.
• Signal Amplification: The board incorporates two RF FET semiconductor devices dedicated to amplifying and adjusting signals, enhancing the reliability and efficiency of data transmission within the system.
• Installation Procedure: During installation, the replacement process is simplified by aligning the board's corner holes with matching holes in the board rack and utilizing the screws previously used to attach the defective board. Care must be taken when removing the defective board to prevent dropping screws. Loosening the screws with one hand while securely holding them with the other ensures smooth removal.
• It serves as the ARCNET driver for internal communications with I/O cores, facilitating data exchange and coordination within the gas turbine control system.
• While mounting the board as a daughterboard requires minimal configuration, adjusting jumper settings to application-specific positions is essential to optimize its performance and compatibility with the system's operational requirements.
• There is no software configuration used on the board.

Jumper Configuration

• The board features 10 jumpers, factory-set at default values but customizable by the installer during initial installation to tailor the board's processing capabilities to meet specific site requirements.
• Some jumpers are pre-set at the factory and cannot be altered by the installer, as they are intended solely for testing purposes during assembly line processes.
• Identifiers prefixed with jp uniquely label each jumper, and the positions of these jumpers must be documented from the defective board to configure the replacement board identically.

WOC is happy to assist you with any of your GE requirements. Please contact us by phone or email for pricing and availability on any parts and repairs.

FREQUENTLY ASKED QUESTIONS

What is DS200PANAH2ADD?
It is an ARCNET LAN Driver Card designed and developed by GE

What is the function of the board?
It serves as the ARCNET driver for internal communications with I/O cores within gas turbine control systems, facilitating data exchange and coordination.

What is the component a daughterboard to?
It is mounted as a daughterboard to the UCIA board, ensuring seamless integration within the control system architecture.

What do the P1 and P2 bus connectors perform?
The P1 and P2 bus connectors allow for the transfer of data to the Control Engine on the UCPB, enabling efficient communication between components.