DS200DTBBG1A - MKV, Terminal Board, Digital I/O

SPECIFICATIONS

Part No.: DS200DTBBG1A
Manufacturer: General Electric
Product Type: Terminal Board Digital Connector Card
Series: Mark V

DS200DTBBG1A is a Terminal Board Digital Connector Card under Mark V series GE. The GE DS200DTBBG1A Terminal Digital Connector Board has two terminal blocks, each containing terminals for 95 signal wires.

• Three 50-pin connections are also included. JFF, JFG, and JFH are the IDs for the 40-pin connectors. There are also five jumpers and bayonet connectors. Because there are three 40-pin connectors on the board, it's crucial to keep track of which 40-pin ribbon wire is linked to which connector. It's critical to get the drive back in service after replacing the board if you want to regain productivity.
• If the ribbon cables are attached to the wrong connections, you must shut down the drive, relocate the ribbon wires to the correct connectors, then restart the drive. This can result in a loss of productivity and can annoy operators working on adjoining drives. There is the ability for up to 110 signal wires to be connected to the terminal blocks.
• Without a method to document where the different signal cables are attached, this will be difficult to manage. The ID for one terminal block is TB1, whereas the ID for the other terminal block is TB2. On each terminal block, the individual terminals are numbered in order. As a result, the terminal block ID and the number assigned to the terminal are used to identify a specific terminal. TB1 90 and TB2 48 are two examples. Terminal 90 on Terminal Block 1 is TB1 90. Terminal 48 on Terminal Block 2 is TB2 48.

The most extensive assortment of GE Speedtronic Mark V control replacement components can be found at World of Controls. Our professionals are here to assist you with your Mark V requirements at any time. Please contact WOC if you require any additional information.

Frequently Asked Questions

What is DS200DTBBG1A?
DS200DTBBG1A is a Terminal Board Digital Connector Card under Mark V series GE.

What is the purpose of the DS200DTBBG1A digital contacts?
This component is the termination for digital contact inputs 47-96. Bringing field contacts back in pair to the right input terminals on the board is advised.

When is it necessary to use an external power supply with the DS200DTBBG1A?
If the board is using 24 VDC inputs, an external power supply is required. Remove the power connector from the power distribution core and connect to 24 VDC.

How to Obtain DS200DTBBG1A?
WOC provides the OEM turbine control products with a warranty. Contact World of Controls.