[email protected]
+1 832 946 3166
Instagram

DS200ADMAH1A

DS200ADMAH1A - LS2100, A/D Daughter Card for DS210DSPC

DS200ADMAH1A - LS2100, A/D Daughter Card for DS210DSPC DS200ADMAH1A - LS2100, A/D Daughter Card for DS210DSPC

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

DS200ADMAH1A - LS2100, A/D Daughter Card for DS210DSPC is available in stock which ships the same day.

DS200ADMAH1A - LS2100, A/D Daughter Card for DS210DSPC comes in UNUSED as well as REBUILT condition.

To avail our best deals for DS200ADMAH1A - LS2100, A/D Daughter Card for DS210DSPC, contact us and we will get back to you within 24 hours.

Request For Quote
Contact Us

Featured Product

SPECIFICATION

Part Number: DS200ADMAH1A
Manufacturer: General Electric
Series: Mark V
Function: ANALOG TO DIGITAL MODULE

General Electric DS200ADMAH1A Analog to Digital Daughterboard (ADMA) Mark V Series. This daughterboard is compatible with a variety of GE drives and exciters. This board's aluminum faceplate has cutouts that make it easy to mount on top of the drive's (DPSC) board. This card buffers, filters, and converts analog and digital I/O fed to the drive once inserted. All system I/O is reliably read, transformed, and communicated when the DS200ADMAH1A board is used. This daughterboard has an additional twelve analog inputs in addition to the ones provided by the drive. This card also includes four analog outputs. The board's eight digital input and output ports can be used to relay digital I/O communications. This device has an integrated programmable logic device.

  • The logic device works to provide interface capabilities between the ADMA I/O and the DSPC processor buses by leveraging static RAM. Two LED indicators are displayed on the board, one green IMOK LED and one red FAIL LED, to notify users to any mistakes or malfunctions.
  • The device's installation instructions should be followed. This will verify that both the DS200ADMAH1A and the inserted drive function properly. Refer to the device manual and datasheet for detailed guidance to wiring and mounting the daughterboard to the DSPC. The maker of the Mark V series, General Electric, was the first to give technical support for this card.
  • WOC's experienced team is ready to assist you with all of your GE Speedtronic requirements. Contact our team by phone or email for the most up-to-date rates and part availability.

 

FREQUENTLY ASKED QUESTIONS

 

Where Does DS200ADMAH1A Connect?

The DS200ADMAH1A is attached to the DSPC board. High-density connectors and cables link the DS200ADMAH1A to the external high voltage terminal board. The DS200ADMAH1A connects to one of the four XA_ and XB_ interface connection pairs on the DSPC boards.

What are the Analog inputs on DS200ADMAH1A?

The DS200ADMAH1A has three analog inputs that are scaled to 200K Hz/V + 1M Hz carrier and converted to frequency throughout a +/-5 V range. On the DS200ADMAH1A, there are nine sampled +/-5 V analog inputs that are translated via 12-bit successive approximation A/D converters and then made available to the DSPC board's DSP through EPLD logic.

How many Analog Outputs Does DS200ADMAH1A have?

There are four analog outputs on the DS200ADMAH1A. The outputs of the DS200ADMAH1A are scaled to drive a 2K ohm, 500 picofarad load with a 12-bit resolution to +/-10 V.

Where to Buy a Digital Daughterboard?

We provide a variety of Digital Daughterboards. Please contact us if you have any questions, and our team will be pleased to assist you.

WORLD OF CONTROLS warrants that from the date of delivery for a period of 36 months all UNUSED / REBUILT goods shall conform in all material respects with their description and any applicable specification.

WORLD OF CONTROLS warrants that from the point of delivery all Repairs will accord with their description and/or remain functional subject to the performance of the Repair Item for a period of 24 months.