DS200AAHAH1ADC - Arcnet Connection Board

Specifications

Part No.: DS200AAHAH1ADC
Manufacturer: General Electric
Product Type: ARCNET CONNECTION BOARD
Series: Mark V

General Electric Mark V DS200AAHAH1ADC is an ARCNET Connection printed circuit board. It was initially part of GE's Mark V LM series of components for the Speedtronic line, and it was manufactured and sold by them. It usually serves as a link between the R> Control Engine and other I/O cores or external modules. It provides access to the ARCNET for certain interfacing units.

• When the R> core is employed, two AAHA boards are usually used. The first AAHA board serves as a link between the R> core and the user interfaces. On the AAHA, there is an APL connector that connects it to the UCPB daughterboard in the UCIA board's R> core.
• The second AAHA board serves as a connection point between the R> core and the COREBUS. It allows for active communication between the I/O cores and the R> Control Engine in the R> core. This AAHA's APL connection connects to a PANA daughterboard.
• On the top side, the DS200AAHAH1ADC is a very small daughterboard with three communication ports. The port on the far left is an EBNC port that is rarely utilized. The ARCBNC-B and ARCBNC-A ports are located next to the EBNC. These two ports are used to connect to the ARCNET network. Three-pin connectors are located at the bottom of the board. A 2-pin 2PL jack is the initial pin connector. The 10-pin APL jack is located in the center of the bottom edge. A 9-pin EPL jack sits next to the APL and is likewise rarely used.
• WOC has the largest stock of Speedtronic Mark V control spares and we can repair your faulty DS200AAHAH1ADC with a warranty. WORLD OF CONTROLS can also supply UNUSED and REBUILT DS200AAHAH1ADC backed up with a warranty. Our team of experts are available round the clock to support your needs.

Frequently Asked Questions

What is the physical location of DS200AAHAH1ADC?

The DS200AAHAH1ADC is found in the R > core at position 6.

How does the DS200AAHAH1ADC communicate over ARCNET?

Connect the Stagelink connection to DS200AAHAH1ADC to initiate ARCNET connectivity with an HMI.

What is the number of BNC connectors on the DS200AAHAH1ADC?

For ARCNET connectivity, the DS200AAHAH1ADC includes two BNC connectors. The DS200AAHAH1ADC is installed in R > for Stage Link connections to the HMI and COREBUS connections to the I/O cores.