World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.
IS230SHRA2AG01 - HART Enabled Analog Input/Output Terminal Board is available in stock which ships the same day.
IS230SHRA2AG01 - HART Enabled Analog Input/Output Terminal Board comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS230SHRA2AG01 - HART Enabled Analog Input/Output Terminal Board, contact us and we will get back to you within 24 hours.
SPECIFICATIONS:
Part Number: IS230SHRA2AG01
Manufacturer: General Electric
Series: Mark VIe
Product Type: HART Enabled Analog Input/Output Terminal Board
Number of channels: 12 channels
Input span: 1 - 5 V dc
Outputs: 24 V dc
Generator current inputs: 0 to 5 A
Analog inputs Current inputs: 4-20 mA
Analog output current: 0-20 mA
Size: 15.9 cm high x 17.8 cm
Operating Temperature: -30 to +65°C
Frequency: 50 or 60 Hz
Repair: 3-7 Day
Availability: In Stock
Weight: 2 lbs
Country of Origin: United States
Manual: GEH-6721L
FUNCTIONAL DESCRIPTION:
IS230SHRA2AG01 is a HART Enabled Analog Input/Output Terminal Board Manufactured and Designed by General Electric as part of the Mark VIe Series used in GE Distributed Turbine Control Systems. The Highway Addressable Remote Transducer (HART®) Enabled Analog Input/Output (SHRA) terminal board is a compact analog input terminal board that accepts 10 analog inputs and two analog outputs and connects to the PHRA or YHRA pack. It allows HART messages to pass between the PHRA and a HART-enabled field device. The 10 analog inputs accommodate two-wire, three-wire, four-wire, or externally powered transmitters. The two analog outputs are 4-20 mA. Only a simplex version of the board is available. High-density Euro-block type terminal blocks are used. An onboard ID chip identifies the board to the PHRA or YHRA for system diagnostic purposes.
INSTALLATION:
The SHRA plus a plastic insulator mounts on a sheet metal carrier that then mounts on a DIN rail. Optionally, the SHRA plus insulator mounts on a sheet metal assembly and then bolts directly to a cabinet.
OPERATION:
On the terminal board, 24 V DC power is available for all the transmitters (transducers). There is a choice of current or voltage inputs using jumpers. HART communication is only possible with the inputs set as 4-20 mA inputs, it will not take place on an input set as ±5 V dc or ±1 mA. The two analog output circuits are 4-20 mA. There is only one cable connection, so the terminal board cannot be used for TMR applications.
WOC has the largest stock of GE Distributed Turbine Control System Replacement Parts. We can also repair your faulty boards. WORLD OF CONTROLS can also supply unused and rebuilt backed-up with a warranty. Our team of experts is available round the clock to support your OEM needs. Our team of experts at WOC is happy to assist you with any of your automation requirements. For pricing and availability on any parts and repairs, kindly get in touch with our team by phone or email.
What is a HART-enabled analog input/output terminal board?
It's a device that allows analog signals from sensors or actuators to be interfaced with a control system while also supporting the HART communication protocol for enhanced functionality and diagnostics.
How does HART communication work?
HART communication utilizes frequency shift keying (FSK) to superimpose digital signals on top of the analog 4-20 mA signal. This allows for bidirectional communication over the same wiring used for the analog signal.
How do I configure and monitor HART devices connected to the terminal board?
This can be done using HART configuration tools such as handheld communicators or software-based solutions provided by the manufacturer of the terminal board or the control system.
