[email protected]
+1 832 946 3166
Instagram

Ds3800hxfc Ge Circuit Board

DS3800HXFC - GE CIRCUIT BOARD

DS3800HXFC - GE CIRCUIT BOARD DS3800HXFC - GE CIRCUIT BOARD

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

DS3800HXFC - GE CIRCUIT BOARD is available in stock which ships the same day.

DS3800HXFC - GE CIRCUIT BOARD comes in UNUSED as well as REBUILT condition.

To avail our best deals for DS3800HXFC - GE CIRCUIT BOARD, contact us and we will get back to you within 24 hours.

Request For Quote
Contact Us

Featured Product

SPECIFICATIONS

Part No.: DS3800HXFC
Manufacturer: General Electric
Product Type: PCB
Series: Mark IV

The DS3800HXFC is a Printed Circuit Board developed by General Electric for the Mark IV series. The Mark IV was created to operate gas or steam turbines. It is based on a network of interconnected microprocessors that monitor the turbine system around the clock. Alignment lettering is marked on one edge of the board. This is broken up with triangular marks.

  • The board's corners are drilled, and nylon extractor clips are installed in two of them. Extractors are useful to technicians when working space is limited because the clips can serve as handles for the PCB while also providing a lever point to push against the frame or chassis to pull the board from its position.
  • There are three mating connectors on the board. One male vertical pin connector, M83503/24-19 8535 male right-angled connector, and 218A4553-1 Amp 533002-1 8728 multi-pin right-angled connector. It has one toggle switch, three light-emitting diodes, or LEDs (one amber, two red), four test points, and four vertical nylon spacers to support the corners of an optional auxiliary board. There are eight jumper switches on the DS3800HXFC's surface. It consists of six resistor network arrays. On the board, there are over forty circuits.
  • The board includes Octal buffers and line drivers, quad differential line drivers with a 15V input voltage, and a 6k minimum input impedance. Octal tri-state buffers/drivers/receivers with tri-state outputs and PNP inputs and hex/quad D flip-flops with buffered clock and direct clear inputs are all included.

Your order will be shipped in a static-reducing plastic bag or covering from the WOC warehouse. GE provided technical support in the form of manuals and datasheets for the DS3800HXFC. Our experts are available to help you with your GE Speedtronic Mark IV needs at any time. Please contact WOC as soon as possible if you require any additional information.

 

Frequently Asked Questions

 

What is DS3800HXFC?
The DS3800HXFC is a Printed Circuit Board developed by General Electric for the Mark IV series.

How to Obtain DS3800HXFC?
World of Controls provides DS3800HXFC as well as other turbine control products. Contact WOC.