DS2020LPPA341A - LINE PROTECTION (40M

SPECIFICATIONS

Part No.: DS2020LPPA341A
Manufacturer: General Electric
Product Type: Line Protection Circuit Board
Series: Mark V

DS2020LPPA341A is a Line Protection circuit Board developed by General Electric under the Mark V series. It has seven jumpers and two terminal blocks, each having three terminals. JP1 through JP7 are the names of the jumpers. There are also test locations on the GE Line Protection Board. The board is mounted on standoffs on another drive component. The board measures 3.5 inches by 7 inches, with screw holes aligned with the standoffs in each corner.

• The GE Line Protection Board DS2020LPPA341A is a daughterboard that adds the processing capability to the other component. The signal wires that connect the board to the other component come straight from that component. Some signal lines are used to send signals to the component, while others are used to receive data from the component. The board receives signals from the components and processes them before sending the results back to the component.
• The 40-pin connector is connected to a ribbon cable that connects the board to the drive's other functional sections. Take note of how the ribbon cable is routed in the interior of the drive before removing the previous board. It's routed in a certain way to reduce the chance of interference with the drive's power wires. Signals can be distorted by electrical wires. The signal cable and the power cables are separated by the ribbon cable.
• When you replace the board, make sure the ribbon cable is routed in the same way. Another consideration is that the ribbon cable is routed to provide free airflow inside the drive and not to obstruct air vents or prevent air from reaching components.

World of Controls has the most comprehensive selection of GE Speedtronic Mark V control replacement components. At any time, our professionals are available to help you with your Mark V requirements. If you want any additional information, please contact WOC.

Frequently Asked Questions

What is DS2020LPPA341A?
DS2020LPPA341A is a Line Protection circuit Board developed by General Electric under Mark V series.

How to Obtain DS2020LPPA341A?
WOC provides DS2020LPPA341A as well as other turbine control products. Contact World of Controls.

Is DS2020LPPA341A a daughterboard?
Yes, DS2020LPPA341A is a daughterboard.