World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.
IS420UCSBH4A - UCSB Controller Module is available in stock which ships the same day.
IS420UCSBH4A - UCSB Controller Module comes in UNUSED as well as REBUILT condition.
To avail our best deals for IS420UCSBH4A - UCSB Controller Module, contact us and we will get back to you within 24 hours.
SPECIFICATIONS:
Part Number: IS420UCSBH4A
Manufacturer: General Electric
Country of Manufacture: United States (USA)
Series: Mark VIe
Function: UCSB Controller
Microprocessor; 600MHz Intel
Memory: 256 MB DDR2 SDRAM
Operating System: QNX Neutrino
Availability: In Stock
DESCRIPTION:
IS420UCSBH4A is a UCSB Controller Module manufactured by General Electric as part of the Mark VIe Series used in gas turbine control systems with a 1066 MHz Intel EP80579 microprocessor. The application code is executed by standalone computers called UCSB controllers. Through onboard 1/0 network (IONet) interfaces, the controller mounts in a panel and communicates with the I/O packs. Only Mark controls I/O modules and controllers are supported by the private, special-purpose Ethernet network known as IONet. The controller's operating system (OS) is QNX Neutrino, a real-time, multitasking OS developed for industrial applications requiring great speed and dependability. The UCSB controller lacks any application I/O hosts, in contrast to conventional controllers that host application I/O on a backplane. Additionally, each controller has access to all I/O networks, providing them with all input data.
If a controller is turned down for maintenance or repair, the hardware and software architecture ensures that no single point of application input is lost. Functional safety loops are implemented to achieve SIL 2 and 3 capabilities using the Mark VIeS UCSBSIA Safety controller and Safety 1/0 modules. Operators who are familiar with SIS applications employ Mark Vles Safety equipment to lower risk in crucial safety functions. These particular control hardware and software have IEC 61508 certification and are specifically configured for work with safety controllers and distributed I/O modules.
The UCSB Controllers offer the Following Advantages:
UCSB INSTALLATION:
A single module that installs directly to the sheet metal of the panel contains the controller. The dimensions for the module envelope and mounting are shown in the diagrams below. Every measurement is in inches. The UCSB must be attached to the panel as depicted, with the vertical airflow through the fins remaining unhindered.
UCSB SOFTWARE AND COMMUNICATION:
Software customized for the controller's use is installed. Rungs or blocks can be run by it. Without needing to restart, small changes to the control software can be done online. The clocks of the 1/O packs and controllers are synchronized to within 100 microseconds using the IEEE 1588 protocol via the R, S, and T IONets. Through the R, S, and T IONets, external data is sent to and received from the control system database in the controller. This comprises the 1/0 modules' process inputs and outputs.
Additionally, in a dual system, these are:
1. Data on initialization and internal state variables from the selected controller
2. Information on the synchronization and status of both controllers
This also covers the following in a triple modular redundant (TMR) system:
UCSB BOOT LED:
In the absence of a mistake, the boot LED remains on throughout the boot process. The LED will blink once per second (Hz) if an error is found. The LED blinks for 500 milliseconds, then goes off. The LED stays off for three seconds after the flashing phase. Flash count reveals failed condition.
The boot LED flashes continuously at a Hz rate if the flash image is genuine but the runtime firmware has not yet been loaded. The firmware loads and the boot LED goes off. Use the ToolboxST app to find out why the controller is blocked if it won't connect online. After receiving an IP address, ToolboxSTplication configures itself over Ethernet.
WOC has the largest stock of GE Speedtronic Mark VIe Replacement Parts. We can also repair your faulty boards. WORLD OF CONTROLS can also supply unused and rebuilt backed-up with a warranty. Our team of experts is available round the clock to support your OEM needs. Our team of experts at WOC is happy to assist you with any of your automation requirements. For pricing and availability on any parts and repairs, kindly get in touch with our team by phone or email.
What is IS420UCSBH4A?
It's a high-performance UCSB Controller Module with a 1066 MHz Intel EP80579 microprocessor.
What is a UCSB Controller?
The UCSB controller is a single-board, stand-alone processor with scalable processing power. There are no batteries or jumper settings required because it has a built-in power supply.
What is the application of the module?
The module allows interoperable redundant configurations that incorporate many platform types into a single redundant set.
What is the operating temperature of the component?
The operating temperature ranges from 22 to 149 degrees Fahrenheit.
