IS420UCSBH3A REV E - Controller Module

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

IS420UCSBH3A REV E - Controller Module is available in stock which ships the same day.

IS420UCSBH3A REV E - Controller Module comes in UNUSED as well as REBUILT condition.

To avail our best deals for IS420UCSBH3A REV E - Controller Module, contact us and we will get back to you within 24 hours.

Request For Quote

SPECIFICATIONS

Part No.: IS420UCSBH3A REV E
Manufacturer: General Electric
Country of Manufacture: United States of America (USA)
Temperature: -30 to +65 oC
Product Type: Controller Module
Availability: In Stock
Series: Mark VIe

Functional Description

IS420UCSBH3A REV E is a Controller Module developed by GE. It is a part of the Mark VIe control system. The module supports five 10/100Base-TX Ethernet ports, allowing for flexible and high-speed communication within the Mark VIe control system. These ports enable reliable connections to both the UDH, CDH, and IONets. The use of a USB drive for backup and restore simplifies the process, ensuring that critical system data is preserved and can be easily restored in the event of a failure. The controller includes a software recovery push-button, allowing for seamless updates to the NAND flash and ensuring the controller is always running the latest firmware. The USB On LED provides real-time feedback during the backup and restore processes, offering visual confirmation of the status.

Procedures to Perform UCSB Backup

Insert USB Drive: Insert a FAT32 DOS-formatted USB drive into the front USB port on the UCSB.
Press the Backup/Restore Button: From the bottom of the UCSB, press and hold the backup/restore button. Continue holding the button until the USB On LED lights up.
Wait for Backup to Complete: Once the button is released, the backup process will begin. The LED will remain lit while the backup is in progress.
Completion: The LED will turn off once the backup is completed successfully.
Remove the Drive: After the LED turns off, remove the USB drive.
Error Indication: If the LED flashes at a rate of 1 Hz, a failure has occurred. In this case, remove the USB drive and retry the process.

Procedures to Perform UCSB Restore

Power Off the UCSB: Begin by removing the power from the UCSB module.
Insert the Backup USB Drive: Insert the USB drive containing the backed-up data into the USB port of the UCSB.
Press the Backup/Restore Button: Press and hold the backup/restore button while applying power to the UCSB. Continue holding the button until the USB On LED lights up.
Wait for Restore to Complete: Release the button once the LED lights up, indicating the start of the restore process. The LED will remain lit during the restore.
Completion: The LED will turn off when the restore completes successfully.
Remove the USB Drive: Once the restore process is complete, remove the USB drive.
Error Indication: If the LED flashes at a rate of 1 Hz, a failure has occurred. In this case, remove the USB drive and retry the restore process.

The WOC team is always available to help you with your Mark VIe requirements. For more information, please contact WOC.

Frequently Asked Questions

What is IS420UCSBH3A REV E?
It is a Controller Module developed by GE under the Mark VIe series.

How do I back up data using UCSB?
Insert a FAT32 USB drive, press and hold the backup/restore button until the USB On LED lights up, wait for the LED to turn off, then remove the drive.

How do I restore data using UCSB?
Power off UCSB, insert the backup USB drive, press and hold the backup/restore button until the USB On LED lights up, wait for the LED to turn off, then remove the drive.