IS215UCVEM09 - Controller Card

SPECIFICATIONS

Part Number: IS215UCVEM09
Manufacturer: General Electric
Series: Mark VI
Product Type: Mark VI Controller Card

IS215UCVEM09 is a Mark VI controller and is part of the GE Speedtronic gas turbine control system. This controller is the combination of IS215UCVEH2A and TPMC815-11 and TPMC 815-11 Cards. The UCVEH2 is the standard Mark VI controller. It is a single-slot board using a 300 MHz Intel Celeron processor with 16 or 128 MB of flash memory and 32 MB of DRAM. A single 10BaseT/100BaseTX (RJ-45) Ethernet port provides TCP/IP protocol used for communication between controller and Toolbox. It has 2 COM Ports(Two micro-miniature 9-pin D connectors).

• The COM1 is Reserved for diagnostics, 9600 baud, 8 data bits, no parity,1 stop bit, and COM2 is used for serial Modbus communication, 9600 or 19200 baud.
• The power requirements are :
  • +5 V dc, 6 A typical, 8 A maximum
  • +12 V dc, 180 mA typical, 250 mA maximum
  • +-12 V dc, 180 mA typical, 250 mA maximum
• The UCVEMxx modules have all the features of the UCVEH2 with the addition of supporting additional Ethernet ports and Profibus. Some UCVEMxx modules support secondary 10BaseT/100BaseTX Ethernet ports for use on a separate IP logical subnet. Configuration of the secondary Ethernet port is performed through the toolbox. The controller validates its toolbox configuration against the existing hardware each time the rack is powered up. A separate subnet address allows the controller to uniquely identify an Ethernet port.
• The TPMC815 is a standard single-width 32-bit PMC (PCI Mezzanine Card Interface) module with a complete ARCNET interface using the controller COM20020. The COM20020 contains the ARCNET controller with a transceiver and Dual-Port RAM. Various network topologies are supported (Star, Tree, Bus). The TPMC815-11x offers the traditional isolated hybrid interface for long distances. The maximum speed of the TPMC815-11x is 2.5 Mbps.

WOC has the largest stock of Speedtronic Mark VI Spares and we can repair your faulty spares with a warranty. WORLD OF CONTROLS can also supply UNUSED and REBUILT components backed up with a warranty. Our team of experts is available round the clock to support your urgent needs related to critical spares, contact us.

 
FREQUENTLY ASKED QUESTIONS

What is Mark VI IS215UCVEM09?

IS215UCVEM09 is a Mark VI controller and is part of the GE Speedtronic gas turbine control system.

Does the IS215UCVEM09 have a Warranty?

WOC can also supply UNUSED and REBUILT IS215UCVEM09 backed up with a warranty of 24 months.

How to Contact WOC by Phone?

Please contact World of Controls FZE for sales at +1 609 385 1231