IS215UCCCH4A REV B - 4-Channel Compact PCI Communication Board

SPECIFICATIONS:

Part Number: IS215UCCCH4A REV B
Manufacturer: General Electric
Series: Mark VIe
Product Type: Controller Card
Bus Interface: Compact PCI (32-bit or 64-bit)
Protocol Support: RS-232, RS-422, RS-485
Connectors: DB9, DB25,
Operating Voltage: 3.3V
Max Cable Length (RS-232): 15 meters
Microprocessor: Intel Pentium M Processor 1.6 GHz
Data Bus Width: 32-bit
Memory: 256 MB
Operating System: QNX Neutrino
Availability: In Stock
Country of Origin: USA
Manual: GEH-6721G

FUNCTIONAL DESCRIPTION:

IS215UCCCH4A REV B is a 4-Channel Compact PCI Communication Board manufactured and designed by General Electric as a part of the Mark VIe Series used in Distributed Control Systems. The board CPCI-7500 is a 4-port serial interface for industrial applications. It is configured by inserting MX modules which the board identifies automatically. Each serial port can be configured individually through modules in the following modes: RS232, RS422, RS485 (with or without optical isolation), and Current Loop (optically isolated). The optically isolated modules allow protection up to 1000 V for use in noisy environments where earth loops can occur. Interrupts, addressing, and transfer rates are controlled through the BIOS. The I/O lines are protected against short circuits, fast transients, electrostatic discharge, and high-frequency EMI. Each port is supported through a 128-byte FIFO buffer for sending and receiving data which guarantees reliable operation with high data volumes. The Power Requirements for this board are mentioned below

• +5 V DC (+5%, -3%, 4.5A (typical) 6.75 max)
• +3.3 V DC (+5%, -3%, 1.5A (typical) 2.0 max)
• +12 V DC (+5%, -3%, 50mA max)

FEATURES:

• Asynchronous 4-port serial interface
• 4 sockets for MX modules
• Modular mounting through MX modules
• Can be configured as RS232, RS422, RS485 with or without optical isolation, 20 mA Current Loop (active, passive), with optical isolation
• Addressing through software
• No jumpers: software configuration
• Automatic module recognition
• 128-byte FIFO memory for each interface
• Common interrupts
• Programmable transfer rate
• 5-, 6- or 8-bit character
• 1, 1½ or 2-stop bits
• Parity: even, odd, or none
• Automatic transmitter control for RS485

WOC has the largest stock of OEM Replacement Parts for GE Distributed Turbine Control systems. We can also repair your faulty boards and supply unused and rebuilt boards backed up with a warranty. Our team of experts is available round the clock to support your OEM needs. Our team of experts at WOC is happy to assist you with any of your automation requirements. For pricing and availability on any parts and repairs, kindly contact our team by phone or email.

FREQUENTLY ASKED QUESTIONS:

What is a 4-Channel Compact PCI Communication Board?

A 4-Channel Compact PCI Communication Board is a hardware interface card designed to fit into a Compact PCI slot, providing multiple communication channels for data transfer. It is used in industrial and embedded applications where high-speed communication is required.

What types of communication protocols does the board support?

The board supports a range of protocols, such as RS-232, RS-422, RS-485, and others depending on the specific model and application.

What is the operating voltage of the 4-Channel Compact PCI Communication Board?

The operating voltage typically ranges from 3.3V to 5V, depending on the specific model and design of the board.

What types of connectors are available on the board for communication?

The board typically features DB9, DB25, or screw-terminal connectors, depending on the protocol it supports. Some models may also offer fiber optic or RJ45 connectors for more advanced communication needs.