DS3820AIQA1A1A - GE CIRCUIT BOARD

SPECIFICATIONS

Part No.: DS3820AIQA1A1A
Manufacturer: General Electric
Product Type: PCB
Series: Mark IV

DS3820AIQA1A1A is a GE turbine control part developed by GE under the Mark IV series. There are eight huge black rectangles on the PCB. Between the black rectangles on the board, there are four metal platforms.

• On the top of three of the metal, platforms are twelve metal screws. The top of the fourth metal platform bears seventeen metal screws. The two thin metal edges with two screw apertures on either side can be used to install the PCB. There are eleven little black half circles on the card. The transistor is the term for these half-circles. There are 32 red LEDs, 16 yellow diodes, and 65 blue diodes in the PCB.
• Each of the four male connection terminals on the board contains ten metal pins. Six blue male connection terminals with twenty-six metal pins are found inside the card.
• The board is connected to other circuit boards via these male connection terminals. Resistors come in a variety of colors and feature many rings. The resistors can have up to five rings to show how much energy they can limit.

The most extensive range of GE Speedtronic Mark IV control components can be found at World of Controls. Our experts are available to assist you with your Mark IV requirements at any time. If you require any additional information, please contact WOC as soon as possible.

Frequently Asked Questions

What is DS3820AIQA1A1A?
DS3820AIQA1A1A is a GE turbine control part developed by GE under the Mark IV series.

How to Obtain DS3820AIQA1A1A?
World of Controls provides DS3820AIQA1A1A as well as other turbine control products. Contact WOC.