[email protected]
+1 832 946 3166
Instagram

5466 1000

5466-1000 - Power Supply Module

5466-1000 - Power Supply Module 5466-1000 - Power Supply Module

World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.

5466-1000 - Power Supply Module is available in stock which ships the same day.

5466-1000 - Power Supply Module comes in UNUSED as well as REBUILT condition.

To avail our best deals for 5466-1000 - Power Supply Module, contact us and we will get back to you within 24 hours.

Request For Quote
Contact Us

Featured Product

SPECIFICATIONS

Part Number: 5466-1000
Manufacturer: Woodward
Product type: Power Supply module
Availability: In Stock
Country of Manufacture: United States (USA)

Functional Description

5466-1000 is a Power Supply module developed by Woodward The power supply has a 2-slot configuration, meaning it can accommodate up to two modules simultaneously. It operates with a 24 VDC input. The power supply is responsible for distributing the appropriate power to the connected modules and components. It ensures that each module receives the required voltage and current to operate reliably. Remove or install power supplies while the circuit is live unless the area is known to be non-hazardous.

Installing a Power Supply

  1. Make certain that the power to the supply being installed is turned off. Check that all of the module connector pins are parallel and straight.
  2. Install a new power supply by aligning the circuit board edges in the card guides, then pushing the unit into the slots until the modules' connectors and the motherboard's connectors make contact.
  3. Firmly push the unit into place by applying even pressure to the top and bottom of the supply's front panel. Alternatively, squeeze the extraction handle.
  4. Tighten the screws that hold the module together.

World of Controls has the most comprehensive selection of GE and Woodward components. Our professionals are available to help you with your requirements at any time. If you require any additional information, please contact WOC immediately.

Frequently Asked Questions

What is 5466-1000?
It is Power Supply module developed by Woodward.

What is the configuration of the power supply?
The power supply has a 2-slot configuration, meaning it can accommodate up to two modules simultaneously.

What is the input voltage required for the power supply?
The power supply operates with a 24 VDC input. It requires a 24-volt direct current power source to function properly.

Can power supplies be removed or installed while the circuit is live?
Generally, power supplies should not be removed or installed while the circuit is live unless the area is known to be non-hazardous.