531X171TMAAFG2 - Terminal Board Relay Card

SPECIFICATIONS

Part No.: 531X171TMAAFG2
Manufacturer: General Electric
Country of Manufacture: United States(USA)
Product Type: Terminal Board Relay Card
Series: EX2000

531X171TMAAFG2 is a Terminal Board Relay Card developed by General Electric. The connection terminals for the majority of signal I/O are present, along with interface circuitry. Cables link the board to the drive control board. There is a connection on the GE Terminal Board Relay Card for attaching several signal lines to the board. The board performs the same tasks as the original boards and is a replacement for a number of boards.

531X171TMAAFG2 Functional Description

The Relay interface card allows for sophisticated communication between the UPS and the computer (software required). The card is designed to be installed in the option slot of Digital EnergyTM VH Series UPS models. The card includes a USB connector, a 9-pole sub-D connector, and four potential free changeover contacts that represent: power failure, general alarm, battery low, and bypass active. The USB/RS232/Relay Card's identification number is 18802.

Characteristics

• Power Supply : 8-18V
• Max. input power : 2W all relays closed
• Signal inputs : on state 2.4V; 1.35mA min.
• Output : relay, screw terminal
• Voltage rating : 60 Vdc or 42 Vac RMS
• Current rating : 1.25 A max (50 VA max)
• Operating temp. : -10 - +40°C
• Storage temp. : max. 60°C

Features

• The GE manual includes advice on how to properly wire the board between the damaged board and the new board. For instance, the connector is ACOM on the old board and AN1 on the new board if a wire is connected to terminal 24 on the faulty board. On the new board, merely switch the wire from the 4TB assembly to the 3TB assembly.
• The board is wrapped in a static-protective bag when you open the box, as you will see. So that static charge cannot accumulate on the board, keep it covered. Hold the board by its edges if you need to pick it up. In other words, avoid pressing the board's components or solder points when holding it.

WOC is here to assist you with your EX2000 requirements at any time. Please contact WOC if you require any additional information.

Frequently Asked Questions

What is 531X171TMAAFG2?
531X171TMAAFG2 is a Terminal Board Relay Card developed by General Electric.

What is the operating temperature of the component?
The operating temperature of the component is from -10 to 40 degrees Celsius.

What is the storage temperature of the component?
The storage temperature of the component is 60 degrees Celsius.

How to Obtain 531X171TMAAFG2?
WOC provides EX2000 as well as other turbine control products. Contact World of Controls.