138607-01 - Transient Data Interface Module

SPECIFICATIONS

Part No.: 138607-01
Manufacturer: Bently Nevada
Product Type: Transient Data Interface Module
Series: 3500
Power Consumption: 10.5 Watts
Data Front panel: 115.2 kbaud maximum
Operating Temperature: -30 to +65 degrees Celsius
Storage Temperature: -40 to +85 degrees Celsius
Humidity: 95%, non-condensing
Un-powered TDI: 12 years - 50 degrees Celsius
Protocol: BN Host.
Baud Rate: 115.2 kbaud max
Availability: In Stock
Country of Manufacture: United States (USA)

Functional Description

138607-01 is a Transient Data Interface Module developed by Bently Nevada. It belongs to the 3500 series of components. The Transient Data Interface (TDI) connects the 3500 monitoring system to GE's System 1 machinery management software. The TDI combines the capabilities of a 3500/20 RIM with the data collection capabilities of a communication processor such as TDXnet.

Configuration Keylock

• Used to set the 3500 rack to either RUN or PROGRAM mode. RUN mode allows normal rack operation but prevents configuration changes.
• PROGAM mode allows for normal rack operation as well as local or remote rack configuration.
• The key can be removed from the rack in either position, allowing the switch to remain in RUN or PROGRAM. Locking the switch in the RUN position prevents unauthorized rack reconfiguration. When the switch is locked in the PROGRAM position, a rack can be remotely reconfigured at any time.

Front Panel LEDs

• OK LED: Indicates when the 3500/22M is operating properly
• TX/RX LED: Indicates when the 3500/22M is communicating with the other modules in the rack.
• TM LED: Indicates when the 3500 rack is in Trip Multiply mode.
• CONFIG OK LED: Indicates that the 3500 rack has a valid configuration.

Alarm Data Collection

• Data from before and after the alarm.
• 1 second of static data collected 10 minutes before and 1 minute after the event.
• Static values of 100 ms were collected 20 seconds before and 10 seconds after the event.
• 2.5 minutes of waveform data collected at 10-second intervals prior to the alarm and 1 minute collected at 10-second intervals after the alarm

World of Controls has the most comprehensive selection of GE and Bently Nevada components. Our professionals are available to help you with your Bently Nevada requirements at any time. If you require any additional information, please contact WOC immediately.

�

Frequently Asked Questions

�

What is 138607-01?
It is a Transient Data Interface Module developed by Bently Nevada.

What modes does the TDI support?
The TDI can be used to set the 3500 rack to either RUN or PROGRAM mode. RUN mode allows normal rack operation but prevents configuration changes. PROGRAM mode allows for normal rack operation as well as local or remote rack configuration.

Can the key be removed from the rack in either mode?
Yes, the key can be removed from the rack in either position, allowing the switch to remain in RUN or PROGRAM.

What happens when the switch is locked in the RUN position?
Locking the switch in the RUN position prevents unauthorized rack reconfiguration.

What happens when the switch is locked in the PROGRAM position?
When the switch is locked in the PROGRAM position, a rack can be remotely reconfigured at any time.